What is Selected Reaction Monitoring/Multiple Reaction Monitoring?
Selected Reaction Monitoring (SRM) is a targeted mass spectrometry technique primarily utilized for the quantification of specific analytes within a complex mixture. It involves isolating and monitoring predefined precursor-product ion transitions, enabling high selectivity and sensitivity.
Multiple Reaction Monitoring (MRM) shares similarities with SRM but allows for the simultaneous monitoring of multiple precursor-product ion transitions within a single analysis. This multiplexing capability enhances throughput and efficiency in quantification experiments.
Select Services
SRM/MRM Technique: A Brief History and Development
The roots of SRM/MRM technique can be found in the early advancements of mass spectrometry, particularly in the 1950s and 1960s. During this period, mass spectrometry was primarily used for qualitative analysis, focusing on identifying and characterizing compounds based on their mass-to-charge ratio (m/z). The ability to selectively detect and quantify specific compounds was limited.
In the 1970s and 1980s, the need for more targeted and quantitative analysis became apparent in various fields such as environmental monitoring, pharmaceuticals, and clinical diagnostics. Researchers began exploring ways to enhance the selectivity and sensitivity of mass spectrometry for quantification purposes.
One significant milestone in the development of SRM was the introduction of triple quadrupole mass spectrometers in the late 1970s. These instruments provided the capability to perform tandem mass spectrometry (MS/MS), where precursor ions are selected in the first quadrupole, fragmented, and then specific product ions are selected and detected in the third quadrupole. This capability laid the foundation for the SRM technique.
As mass spectrometry technology continued to advance, particularly with improvements in sensitivity, speed, and data processing capabilities, SRM evolved into Multiple Reaction Monitoring (MRM). MRM extends the capabilities of SRM by enabling the simultaneous monitoring of multiple precursor-to-product ion transitions within a single analysis, thereby enhancing throughput and sensitivity.
In recent decades, SRM/MRM has become indispensable in various scientific disciplines, including proteomics, metabolomics, environmental analysis, and clinical research. Technological advancements, such as the development of high-resolution mass spectrometers and improved data acquisition software, have further expanded the utility and versatility of SRM/MRM techniques.
Principles of SRM/MRM
At its core, mass spectrometry operates on the principle of separating ions based on their mass-to-charge ratio (m/z) and measuring their abundance. In SRM/MRM, this process is enhanced by tandem mass spectrometry (MS/MS), where precursor ions of interest are selected in the first quadrupole (Q1), fragmented in a collision cell, and then specific product ions are selected and detected in the third quadrupole (Q3). This precursor-to-product ion transition is precisely controlled, allowing for highly selective and sensitive detection of target analytes amidst complex sample matrices.
Principle of peptide selection by selected/multiple reaction monitoring (SRM/MRM) mode of triple quadrupole mass spectrometry (QqQ MS) (Uchida et al., 2013).
Specifics of SRM/MRM Methodology:
The SRM/MRM methodology involves several key steps:
- Precursor Ion Selection: Specific precursor ions corresponding to target analytes are chosen based on their unique mass and fragmentation patterns.
- Fragmentation: The selected precursor ions undergo controlled fragmentation through collision-induced dissociation (CID) or other fragmentation techniques, producing characteristic product ions.
- Product Ion Selection: In SRM, a single product ion corresponding to the expected fragmentation of the precursor ion is monitored, providing high specificity. In contrast, MRM allows for the simultaneous monitoring of multiple product ions, enhancing throughput and versatility.
- Quantification: The abundance of the selected product ions is measured and correlated with the concentration of the target analyte, enabling precise quantification over a wide dynamic range.
Comparison with Other Mass Spectrometry Techniques:
Compared to other mass spectrometry techniques such as full-scan MS and single-reaction monitoring (SRM), SRM/MRM offers several advantages:
- Enhanced Selectivity: SRM/MRM provides superior selectivity by specifically monitoring predefined precursor-to-product ion transitions, minimizing interference from background noise and co-eluting compounds.
- Increased Sensitivity: The tandem mass spectrometry configuration of SRM/MRM enhances sensitivity by selectively amplifying the signal of target analytes, even at low concentrations, while suppressing background noise.
- Quantitative Accuracy: The ability to precisely control precursor and product ion transitions, coupled with robust calibration strategies, ensures high quantitative accuracy and reproducibility in SRM/MRM analyses.
Instrumentation and Setup of SRM/MRM
The successful implementation of SRM/MRM relies heavily on state-of-the-art instrumentation and meticulous experimental setup procedures. A comprehensive understanding of the equipment involved and the steps required for setup is crucial for achieving reliable and reproducible results.
Central to SRM/MRM experiments is the triple quadrupole mass spectrometer, which consists of three quadrupole analyzers arranged in series. These instruments offer exceptional selectivity and sensitivity for targeted quantification through the precise manipulation of ion trajectories. Additionally, robust liquid chromatography systems are typically employed for analyte separation prior to mass spectrometric analysis, enhancing the overall sensitivity and throughput of SRM/MRM experiments.
Steps Involved in Setting up an SRM/MRM Experiment:
The setup of an SRM/MRM experiment involves several critical steps, beginning with the selection of appropriate precursor and product ion transitions based on the analyte of interest. Following this, optimization of instrumental parameters such as collision energy, cone voltage, and dwell times is performed to maximize sensitivity and selectivity. Chromatographic conditions, including mobile phase composition, flow rate, and column temperature, are meticulously optimized to achieve efficient analyte separation and peak resolution. Prior to sample analysis, instrument calibration and performance verification procedures are conducted to ensure accurate quantification and data quality.
Factors Influencing Instrument Performance and Optimization:
Several factors can influence the performance and optimization of SRM/MRM experiments, including instrument stability, sample matrix effects, and ionization efficiency. Ensuring consistent instrument performance through routine maintenance and calibration is essential for reliable quantification results. Additionally, careful consideration of sample preparation techniques and matrix effects is crucial to minimize interferences and enhance analytical accuracy. Optimization of ionization parameters and chromatographic conditions further contributes to the robustness and reproducibility of SRM/MRM analyses, ultimately enabling confident and precise quantification of target analytes.
Applications of SRM/MRM
Proteomics and Protein Quantification:
In proteomics, SRM/MRM techniques enable precise quantification of proteins across complex biological samples, providing valuable insights into cellular processes, disease mechanisms, and therapeutic targets. Researchers leverage SRM/MRM to quantify protein expression levels, post-translational modifications, and protein-protein interactions with exceptional accuracy and sensitivity. By elucidating the dynamic proteome landscape, SRM/MRM facilitates biomarker discovery, drug development, and personalized medicine, ultimately advancing our understanding of health and disease.
Metabolomics and Small Molecule Analysis:
The targeted quantification capabilities of SRM/MRM are instrumental in metabolomics studies, allowing researchers to measure metabolite concentrations with high specificity and sensitivity. By profiling small molecules in biological samples, SRM/MRM enables comprehensive analysis of metabolic pathways, disease biomarkers, and drug metabolism. From identifying disease-specific metabolic signatures to monitoring treatment responses, SRM/MRM empowers metabolomics research with insights into biochemical processes and disease pathogenesis, paving the way for precision medicine and personalized interventions.
Select Services
Environmental Monitoring and Food Safety:
In environmental monitoring and food safety, SRM/MRM techniques play a critical role in detecting and quantifying contaminants, pollutants, and toxins with exceptional precision and accuracy. By selectively targeting analytes of interest, SRM/MRM enables rapid and reliable quantification of environmental pollutants, ensuring regulatory compliance and mitigating environmental risks. In the food industry, SRM/MRM facilitates the detection of allergens, pesticides, and adulterants, safeguarding food quality and public health. From monitoring water quality to ensuring food safety, SRM/MRM empowers environmental and food scientists with robust analytical capabilities for hazard identification and risk assessment.
Clinical Diagnostics and Biomarker Discovery:
SRM/MRM techniques are increasingly adopted in clinical diagnostics for the precise quantification of biomarkers associated with diseases and physiological conditions. By accurately measuring biomarker concentrations in clinical samples, SRM/MRM enables early disease detection, disease monitoring, and treatment optimization. Moreover, SRM/MRM facilitates biomarker discovery through targeted proteomic and metabolomic analyses, uncovering novel disease markers and therapeutic targets. From cancer diagnostics to cardiovascular disease monitoring, SRM/MRM holds immense promise for improving patient outcomes and advancing precision medicine.
Reference
- Uchida, Yasuo, et al. "A study protocol for quantitative targeted absolute proteomics (QTAP) by LC-MS/MS: application for inter-strain differences in protein expression levels of transporters, receptors, claudin-5, and marker proteins at the blood–brain barrier in ddY, FVB, and C57BL/6J mice." Fluids and Barriers of the CNS 10.1 (2013): 1-22.